How to make a pattern
• Make basic pattern front and back until your hips • Draw a neck in front and rear pattern • Extend into kupnat front neckline, down to the bottom, quotes and separate the front right and left
• Make pattern fit the user's arm, but the length plus 2 cm • Design front pattern that has been separated above the fabric, also behind the pattern and the pattern of arm
X-X fabric width 55 cm x 2 = 110 X-Z Fabrics 135 cm long LD Layer chest Rear layer LB
• The pattern of the left front (which will become the center front) is designed in a different fabric
How to sew:
1. Obras all lint pieces of fabric that will be sewn
2. Attach fabric lining the chest, turn and grinds 1mm from the edge of the seam, fold the edge / lint layer inward, then the machine grinds with dejahit with stab som.
3. Sewing is back kupnat
4. Front shoulder seam, with shoulders back, neck and attach the fabric layer, the layer with the machine grinds, 1 cm from the seam, baste and sew with a stab som
5. Put a zipper on the back center seam
6. Hem stitching right and left side of the body then jahitlah bottom hem with stab som
7. Hem stitching right arm and left later with a stab som hem jahitlah
8. Put your right arm and left arm in arm hollow body
No comments:
Post a Comment